*   Xbox 360 Stealth Controller Usage Instructions   *

Congratulations on the purchase of your Stealth Controller from RapidFireMods. You may have some questions on how to use the controller when it is first received.  Before calling or e-mailing RapidFireMod’s support team, please follow the directions below to ensure your controller is working properly.

1.       Place a fresh set of batteries in the controller. Your Stealth Controller uses more energy than a regular, unmodified controller, so it will need newer batteries to function properly.

2.       Turn your controller on and sync it to the Xbox 360 Console. To do this press the round button on the faceplate of the Xbox 360; it is located directly below the right side of the DVD Tray. The ring of light at the power button should start the Xbox 360 should start rotating clockwise.

Now, with the controller turned on, press the small button on top of the controller. This is located beside the engraved “Microsoft”. After a few seconds, the ring of light on the controller should start rotating clockwise, and will eventually stop, having only one light lit on both the controller and the Xbox 360 Console.

3.       Your controller should now be synced to the Xbox 360. To turn the mod on, quickly press the sync button on the top of the controller. The controller’s bottom-right LED should flash either one, two, three or four times. This indicates the mode in which your controller is operating. (i.e. one flash = first mode, two flashes = second mode, etc) If the bottom-right LED flashes continuously, your controller is in the “pause” mode. To correct this, just pres the sync button again, and the controller should resume normal operation.

That’s all there is to it! If you have any other questions or comments about the controller you received, please call our office or e-mail us at:

Email: Support@rapidfiremods.com
Phone:  (740) 473-6663